Refill Toner Home page
Refill Toner supply discount toner refills for your laser printer cartridges. Refilling empty cartridges with our refill toner saves money and recycles your cartridge. Our refill toner is quality toner which allows you to refill your toner cartridges several times.
Save money! - Do it yourself - Fast and easily !
For many models you just pull out the plug and pour the refill toner in through the funnel top we supply. Simple! No mess!
Genicom Intelliprint CI 160 Colour 16ppm refill toner
Refill toner bottle with screw on funnel top.
Do not be concerned if the refill toner for your Genicom Intelliprint CI 160 Colour 16ppm has what appears to be an unrelated name. This is because of the sharing of the engine between different makes and models.
The Genicom Intelliprint CI 160 Colour 16ppm is refilled with the "Twist and Pour" fill method
These are general instructions for this fill method. We supply specific instructions for the majority of printers with the toner. Simply open the Genicom Intelliprint CI 160 Colour 16ppm toner port and pour the toner in through the place where it comes out from.
These cartridges have an end cap that twists open when you install the cartridge into the printer. Normally it is closed to stop the toner spilling out. You hold the toner cartridge upright on its end, with the end cap at the top. You twist open the end cap in the same way as when you install the cartridge in the printer. Overall these cartridges are extremely easy to refill.
First of all prepare your worksurface. Cover your work surface with some newspaper. You may choose to wear latex gloves or use a dust mask.
These cartridges normally have separate photoconductor imaging drum units. Take care not to touch or damage the imaging drum on the bottom of the photoconductor drum unit. Greasy marks or nicks in the surface will ruin the print quality. The OPC drum is light sensitive. Do not expose it to normal office lighting for more than 10 minutes.
Hold the cartridge upright on its end with the end cap at the top. Undo the latch on the end cap. Twist it open so that the toner port is open. If the funnel that we supply with the toner is too large, you may need to make a smaller funnel out of a piece of paper.
Give the toner bottle a good shake to get air into the powder so it flows easily, remove the top and seal and screw on the spout-shaped cap supplied with the toner.
Pour slowly into the toner chamber and be careful not to squeeze the bottle hard.
Leave an air space at the top. We may supply more or less toner in the bottle than your cartridge can contain. Do not overfill. Ensure that there is at least 5cm of space above the toner with the cartridge on its end.
Wipe any loose toner off the outside
round the hole with a duster and then close the end cap so that it does
Replace the cartridge into its plastic bag. Clean away any spilt toner and you are done!
Note that you have done nothing to disturb the cartridge so if it had packed up because it had run out of toner you should have it back in action without affecting any components.
We suggest you always have at least one spare refilled cartridge ready to be used in your machine as you do not want to have to refill a cartridge in the middle of a print run.
We also suggest that you always have
one spare new OEM or remanufactured cartridge as well. Your refilled ones
will go on beyond their first life and will save you money.......but they
will not go on for ever! Sooner or later something will deteriorate inside
and you will need to start another one.
You have probably got the idea now
that the manufacturers are doing their best to protect their large toner
cartridge profits from people like you who want to refill their own cartridges
and from the remanufacturers who offer a better priced replacement. In
recent years they have added electronic chips to some cartridges which
monitor how much toner is left. It would be fine if that was all they
did but some of them also close down the machine when it goes low.......
and refilling it won't reverse that. So for some machines you need to
screw or plug in a new chip before your refilled cartridge will work.
We either supply the chip with the toner where it is always needed or
else, where one chip lasts for several refills, we draw your attention
to it so you can buy it separately .
We sell compatible and not original toner. Any names used on this web site are used for identification purposes only and are hereby expressly acknowledged as the trademarks of their respective owners.
Bottles may contain more or less than is required for any specific model.
Prices are subject to change without notice from those displayed.