laser refill toners brother chips

Refill Tonerchips inks cartridge

Refill Toner Home page

 

Refill Toner supply discount toner refills for your laser printer cartridges. Refilling empty cartridges with our refill toner saves money and recycles your cartridge. Our refill toner is quality toner which allows you to refill your toner cartridges several times.

Save money! - Do it yourself - Fast and easily !

For many models you just pull out the plug and pour the refill toner in through the funnel top we supply. Simple! No mess!

laser toner refills chips inkjet

Lasermaster 1000 /KX /PC /PS2 refill toner

Square Order your Lasermaster 1000 /KX /PC /PS2 refill toner on our TonerTopUp website now!

Lasermaster 1000 /KX /PC /PS2 refill toner
Click on the link to the left to order your toner refill now!

Lasermaster 1000 /KX /PC /PS2 refill toner
Refill toner bottle with screw on funnel top.
 

Information

Square The Lasermaster 1000 /KX /PC /PS2 is one of a range of models sharing a common "engine". These may be badged by different manufacturers. They have the following range of cartridges.

HP 92295A Canon R64-0002-850

Square Do not be concerned if the refill toner for your Lasermaster 1000 /KX /PC /PS2 has what appears to be an unrelated name. This is because of the sharing of the engine between different makes and models.

Wavy

The Lasermaster 1000 /KX /PC /PS2 is refilled with the "Unscrew, Unplug and Pour" fill method

Square These are general instructions for this fill method. We supply specific instructions for the majority of printers with the toner. This is a straightforward and quick way to refill.

First of all prepare your worksurface. Working in an area of subdued light, cover your work surface with some newspaper. You may choose to wear latex gloves or use a dust mask. Take care not to touch or damage the imaging drum on the bottom of the Lasermaster 1000 /KX /PC /PS2 toner cartridge. Greasy marks or nicks in the surface will ruin the print quality.

FIller cap

The filler cap is hidden under the removable end panel. Unscrew the end panel from the side of the cartridge. Put the screws somewhere safe. Remove the end panel. Locate and remove the round plastic plug on the side of the Lasermaster 1000 /KX /PC /PS2 toner cartridge with pliers or a flathead screwdriver. Carefully avoid damaging the plastic around the edge of the hole. Push the flathead screwdriver under the lip of the filler cap and lever it upward. Work around the edge of the filler cap until it pops out.

Petrol

Pour slowly into the toner chamber and be careful not to squeeze the bottle hard.

Leave an air space at the top. We may supply more or less toner in the bottle than your cartridge can contain. Do not overfill. Ensure that there is at least 5cm of space above the toner with the cartridge upright on its end.

Wipe any loose toner off the outside round the hole with a duster and then close the hole with the filler cap so that it does not leak. You may like to test the seal by holding the cartridge above a sheet of white paper and gently shaking it. If some toner leaks, stick brown vinyl packaging tape around the edge of the filler cap. Replace the end panel and screws.

See the instructions provided for emptying the waste toner. The waste toner can build up and permanently damage the toner cartridge during the first refill. Emptying it each time you refill ensures that the toner cartridge lasts for the maximum number of refills (typically three).

Replace the cartridge into its lightproof plastic bag. Clean away any spilt toner and you are done!

Note that you have done nothing to disturb the cartridge so if it had packed up because it had run out of toner you should have it back in action without affecting any components.

We suggest you always have at least one spare refilled cartridge ready to be used in your machine as you do not want to have to refill a cartridge in the middle of a print run.

We also suggest that you always have one spare new OEM or remanufactured cartridge as well. Your refilled ones will go on beyond their first life and will save you money.......but they will not go on for ever! Sooner or later something will deteriorate inside and you will need to start another one.

Killer Chips

You have probably got the idea now that the manufacturers are doing their best to protect their large toner cartridge profits from people like you who want to refill their own cartridges and from the remanufacturers who offer a better priced replacement. In recent years they have added electronic chips to some cartridges which monitor how much toner is left. It would be fine if that was all they did but some of them also close down the machine when it goes low....... and refilling it won't reverse that. So for some machines you need to screw or plug in a new chip before your refilled cartridge will work. We either supply the chip with the toner where it is always needed or else, where one chip lasts for several refills, we draw your attention to it so you can buy it separately.

Click here to view information on our products for the Lasermaster 1000 /KX /PC /PS2 and to order!

Go to Top

xerox epson hp canon konica minolta lexmark oki inks

Contact us at: sales - at - refilltoner.co.uk
VideFlow sports video analysis software ai android app

Compatible smart chips for resetting are available from EcoStar Printer Chips

We sell compatible and not original toner. Any names used on this web site are used for identification purposes only and are hereby expressly acknowledged as the trademarks of their respective owners.

Bottles may contain more or less than is required for any specific model.

Prices are subject to change without notice from those displayed.

A fuller range is available from TonerTopUp